JUMBO DRILL RIGS AND BOLTERS – MINE MASTER

Mine Master supply drilling jumbos and rock bolting machines which are operating in harsh rock conditions in mines and tunnel projects. Its broad product range includes standard machinery, however, should you require special solutions that are tailor-made, Mine Master is able to do just that and meet your requirements.

PRODUCT LINES

DRILLING RIGS

2

Face Master 1.4 – The mechanized drill rig for ultra low seams

The mechanized drill rig for ultra low seams is designed for drilling blastholes of diameters between 41 mm and 76 mm and of net length 3.2 m. The unit can be used in methane-free mineral underground workings. Design allows effective drilling of blastholes in underground workings of height up to 1.6m.

5

Face Master 1.7 – The mechanized drill rig for low seams

The mechanized drill rig for low seams is designed for drilling blastholes of diameters between 41 mm and 76 mm and of net length 3.2 m. The unit can be used in methane-free mineral workings. Design allows effective drilling of blastholes in workings of height up to 2.0 m.

Face Master 1.7L – New Generation mechanized drill rig for low seams with air-conditioned cabin

  • Hydraulically operated, ergonomic, “capsule” type operator’s cabin,
  • The cabin system as well as the front frame is certified for transmission of loads at kinematics 60kJ
  • Front operator’s window complies with P8B according to EN-356
  • The cabin is equipped with air conditioning, which works both during transportation and with mine’s power grid of 500V
  • The cabin is also equipped with particle filter
  • Additionally, hydrogen sulfide filter has been installed in the cabin in order to protect the operator against gas leaks, which often occur in KGHM’s headings,
  • Working unit has been based on an already proven design of B40HD boom and Montabert’s HC109 drill, equipped with water swivel with higher resistance to the aggressive flushing
  • In order to ensure excellent traction, the rig is equipped with main pivot with double rotation joint (vertical with horizontal oscillation).Thanks to this solution it is possible to obtain very good stability during maneuvering as well as to use the rig in reduced width of headings.
  •  

Face Master 2.3 – Twin Boom Drilling

The twin boom drilling rig is designed for drilling blastholes of diameters between 41 mm and 76 mm and of net length 3.8 m. The unit can be used in methane-free mineral workings. Design allows effective drilling of blastholes in workings of height from 2,5m up to 6.1 m.

  • The Face Master 2.3 is a twin boom face drilling mining rig with 50 m2 coverage and power shift four wheel drive transmission.
  • Direct controlled drilling system with anti-jamming, collaring, simple frequency functions and feed control to optimize the drilling parameters.
  • B 40 L booms with 1000 mm (40 in) extension directly controlled by two-axial joysticks, which enables accurate and fast positioning between holes.
  • F 7000 series aluminum feed with hollow stainless steel wear rails – simple design with low maintenance cost and long operation time.
  • Minimum tramming height 2.3 m with adjustable operator’s seat. Total width of the machine is 1,99m, which is able to tram in minimum width of headings 4,0m @90 degrees.
  • Articulated carrier with four-wheel drive – excellent grade ability and fast tramming. Service and emergency / parking brakes are provided – SAHR system. Four jacks for stable set up.
  • Basic rig includes FOPS – approved operators canopy.

Face Master 2.8 CC – Twin Boom, computer controlled face drilling mining rig

  • The Face Master 2.8CC is a twin boom face drilling mining rig with 70 m2 coverage and power shift four wheel drive transmission.
  • Direct controlled drilling system with anti-jamming, collaring, simple frequency functions and feed control to optimise the drilling parameters.
  • As a option the machine is equipped with computer control system DBPL – providing to operator: Manual boom control, Drifter control,Dril log, Drilling pattern planning and recording.
  • B 40 L booms with 1500 mm (60 in) extension directly controlled by two-axial joysticks, which enables accurate and fast positioning between holes.
  • F 7000 series aluminium feed with hollow stainless steel wear rails – simple design with low maintenance cost and long operation time.
  • Minimum tramming height 2.8 m with adjustable operator’s seat in environmental cabin.
  • Articulated carrier with four-wheel drive – excellent grade ability and fast tramming. Dynamic and static brakes. Four jacks for stable set up.

Face Master 3.0 – Twin Boom Drill Jumbo with basket

The twin boom drilling rig is designed for drilling blastholes of diameters between 41 mm and 76 mm and of net length 3.8 m. The unit can be used in methane-free mineral workings. Design allows effective drilling of blastholes in workings of height from 2,5m up to 6.1 m.

  • Diesel powered articullated chassis with permanent 4-wheel drive.
  • Fail-safe, wet multi-disc service brakes with additional fail-safe emergency-parking brake.
  • Latest concept heavy duty alloy profile feeder with stainless steel guide surfaces. Designed to improve performance and reduce operation costs.
  • Hydraulic joystick steering with full proportional control. Shock protection is provided.
  • Minimum tramming height: 2.9 m.
  • B 40L head rotation boom with full automatic parallelism in both planes and the boom can also be used for cross-cutting.
  • Hydraulic steering ensures low operation costs and high performance.
  • Reliable hydraulic controls – ensuring low operating costs and high performance.

Face Master 2.5 NVDR – Narrow Vein Single Boom drilling Rig

New generation narrow vein drill rig is designed for high performance and safety.

  • Working unit with 2-axial rotary actuator for superior maneuverability
  • 360 degrees roll-over in both planes for safety replacement of drill bit from operator’s compartment
  • Proven design of central oscillation main pivot for excellent traction.
  • FOPS & ROPS certified operator’s protection canopy with lifting segment for better visibility during vertical drilling
  • Drilling coverage 25 m2 (5x5m)
  • Powerful hydrostatic tramming system to drive at 14 degrees angle
  • Dedicated automated main articulation lock for extra stability during drilling operations.

Face Master 2.3 – 1B – Single Boom Drilling Rig

The single boom drilling rig is designed for drilling blast holes of diameters between 41 mm and 76 mm and of net length 3.8 m. The unit can be used in methane-free mineral workings. Design allows effective drilling of blast holes in workings of height from 2,5m up to 6.1 m

  • The Face Master 2.3-1B is a single boom face drilling mining rig with 43 m2 coverage and power shift four wheel drive transmission.
  • Direct controlled drilling system with anti-jamming, collaring, simple frequency functions and feed control to optimize the drilling parameters.
  • B 40 L boom with 1000 mm (40 in) extension directly controlled by two-axial joysticks, which enables accurate and fast positioning between holes.
  • F 7000 series aluminum feed with hollow stainless steel wear rails – simple design with low maintenance cost and long operation time.
  • Minimum tramming height 2.3 m with adjustable operator’s seat. Total width of the machine is 1,99m, which is able to tram in minimum width of headings 4,0m @ 90 degrees.
  • Articulated carrier with four-wheel drive – excellent grade ability and fast tramming. Service and emergency / parking brakes are provided – SAHR system. Four jacks for stable set up.
  • Basic rig includes FOPS – approved operators canopy.

BOLTING RIGS

Roof Master – 1.4

“High Thrust” rotary drilling system incorporating dry drilling with dust collection.Patented drilling system that uses separate drilling rods to drill a 1.2m long hole in 1.6m of height.

Drilling boom enables the drilling module to install bolts over a 5.0m straight line. The module is also capable of angle bolting. The bolt magazine is capable of holding up to 6 bolts.

Operator is positioned, and located in an comfortable, air-conditioned cabin – that provides excellent visibility whilst bolting.
Ergonomic, fully adjustable operator seat with suspension. Hydraulically adjustable operator’s protection canopy conforming to FOPS & ROPS regulations.

Traction is provided by a totally independent hydraulic system, comprising of hydraulic motors directly coupled on the wheels. Minimum tramming height: 1.4 m.

Roof Master – 1.7 – The mechanized roof bolter for low seams

The mechanized roof bolter for low seams is designed for bolting roofs and walls in low seams (minimum height 2.0 m). The drilling system of the unit enables the operator to drill holes for bolts in rock of compressive strength Rc<= 240 MPa. Dry drilling is performed by the rotary method which has the added advantage of very efficient dust collection system. The unit is designed to install both friction and resin bolts of length 1.6 or 1.8 m by a single operator.

Roof Master 2.0 AR – DE - SWK-AR-DE (Diesel/Electric) roof bolter

Poland SWK-AR-DE (Diesel/Electric) roof bolter articulated machine has been specially designed for the drilling requirements of Lubin mine by Mine Master and J.H.Fletcher – USA.

It combines the maneuverability of an articulated chassis, the tramming capability of a diesel engine and powerschif transmission, and possibility of drilling from either the diesel engine or electric motor.

In order to achieve this versatility, the machine is equipped with two main hydraulic pumps: one powered from the diesel engine and the other from the electric motor. In addition each power source drivers a blower that is used for the dust collection system.

The first unit sold Lubin cooper mine in November 1999. From very beginning our machine had been accepted by user, and as a result of above we received order for next machine.

Roof Master 2.3 – High Reach Roof Bolter with mesh handler

Self-propelled bolting rig Roof Master 2.3 designed for bolting at the height of 4 up to 7m. The rig is capable to install mechanic expansion shell bolts, resin bolts and cement grouted bolts as well as wire mesh, prepared in rolls 2,5m x 25m.

INQUIRY FORM